Noun:

মাপনদণ্ড নিয়ামক,

bedplate's Usage Examples:

A heavy cast iron bedplate secures the engine to its base, usually of concrete.

The cylinder is attached to one end of the bedplate, the crankshaft bearings.

It uses an aluminum engine block, die-cast aluminum bedplate, and an aluminum cylinder head.

Play media The bedplate is the relatively heavy metal foundation on which all the other pieces.

The block uses a bedplate featuring a perimeter wall with transverse webbings for durability and.

The engine's spring mounted box girder bedplate was designed to minimise vibration.

It uses aluminium sand casting in bedplate construction (divided at the height of the crankshaft) with wet cylinder.

It uses a grey cast-iron block with die-cast aluminum bedplate, aluminum cylinder head, chain-driven DOHC valvetrain with hydraulic tensioners.

was supported in 3 main bearings, each 25 inches long, on a single cast bedplate.

Top right, the trunk guide and bedplate of the engine under manufacture, beyond the bedplate is the flywheel and connecting rod of a small.

The engine features a two-piece "bedplate" aluminum crankcase for extra stiffness.

engine's crankshaft and supported by an extension of the diesel engine's bedplate.

The main generator is bolted solidly to the engine bedplate and crankcase to form a compact and rigid unit and the auxiliary generator.

simulated mechanical stress; reinforced by a cast lower crankcase alloy bedplate (AlSi17Cu4Mg) mimicking a ladder-frame design, and including five GGG50.

inverted-tooth chain driving the camshaft, forged steel crankshaft, cast aluminum bedplate with main bearing cap inserts made of iron, high-pressure fuel rail with.

It also used a strengthened alloy crankshaft bedplate for the five main bearings, and a two-part baffled oil sump, and a light-alloy.

vermicular graphite cast iron (GJV/CGI); nodular graphite reinforced cast iron bedplate frame with seven main bearings and four bolts per bearing, die-forged chrome.

In that regard, a reconditioned crankshaft was mounted onto a new bedplate at W's factory in Zwolle in November 2006 and delivered to the ship at.

restarting the blast furnace, because he bought a blowing cylinder and its bedplate from the old blast furnace at the Eskbank Ironworks, in October 1886, although.