Noun:

Bushing,

bushings শব্দের বাংলা অর্থ এর উদাহরণ:

current transformer (ZSCT) (also known as a window-type current transformer) Bushing-type current transformer Voltage transformer এই চিহ্নগুলির মধ্যে একটি বৃত্ত ।

bushings's Usage Examples:

electrical applications are referred to as "insulating bushings".

Most common are molded rubber bushings that are inserted into hole diameters up to 2″ (51 mm).

These bushings often take the form of an annular cylinder of flexible material inside.

Muzzy-Lyon Company and Federal Bearings and Bushing, an engine bearings and bushings manufacturing company founded in 1915 by a group of Detroit businessmen.

theoretical centres of each ball joint or bushing Selecting the rates of the bushings Analysing the loads in the suspension Designing the spring rates Designing.

multi-links do use a trailing arm, control arm or wishbone, which has two bushings at one end.

on top to enhance traction), trucks (with urethane bushings), wheels (with sealed bearings), bushings, nuts and bolts to fasten the truck and wheel assembly.

The front of the H attaches to the body via rubber bushings, and the rear of the H carries each stub-axle assembly, on each side of.

wearing surfaces were needed inside the cylinders and provided by cast-iron bushings.

the bushings of the inner links.

The "bushingless" roller chain is similar in operation though not in construction; instead of separate bushings or sleeves.

In the former case, bearings or bushings are provided at the mounting points where the axle is supported.

more as a precision made tool utilizing powerful springs and high grade bushings as opposed to a cheap import.

Hardware: Nuts, bolts, and screws that hold the trucks, bushings, and base plate onto the board.

Through reboilerings, rebalancings and cylinder bushings during its service life, this single class eventually ended up as six distinct.

for horizontal radial movement in older designs, and rubber or trunion bushings for vertical hinged movement.

configurations of customary sized bushings.

Drill bushings can generally be classified as: press fit bushings or renewable bushings.

The rotary bushings are located at the center of the rotary table.

suspension bushings, cab mounts, steering system bushings, exhaust isolators, rubber compound Napoleon - Products: anti-vibration bushings and suspension.

Synonyms:

nonconductor; dielectric; insulator;

Antonyms:

conductor; semiconductor device; semiconductor; electrical shunt;