Noun:

কনেক্তিংরড,

connecting rod's Usage Examples:

A connecting rod is the part of a piston engine which connects the piston to the crankshaft.

Together with the crank, the connecting rod converts the reciprocating.

by the connecting rod are transmitted along the longitudinal axis of the connecting rod.

The force exerted by the piston on the connecting rod results.

the connecting rod for each cylinder.

It has a cylindrical surface, to allow the crankpin to rotate relative to the "big end" of the connecting rod.

When combined with a connecting rod, it can be used to convert circular motion into reciprocating motion.

A return connecting rod, return piston rod or (in marine parlance) double piston rod engine or back-acting engine is a particular layout for a steam engine.

This force then acts downwards through the connecting rod and onto the crankshaft.

The connecting rod is attached to the piston by a swivelling gudgeon.

enables the connecting rod to freely move outside the cylinder.

Because of the very small bore-to-stroke ratio on such engines, the connecting rod would hit.

the cylinders periodically pushes the piston down, which, through the connecting rod, turns the crankshaft.

This crosstail in turn connected to and operated a single connecting rod, which turned the crankshaft.

or piston pin US) connects the piston to the connecting rod, and provides a bearing for the connecting rod to pivot upon as the piston moves.

beam is used to apply the force from a vertical piston to a vertical connecting rod.

In this case, a rocking couple is caused by one connecting rod swinging left (during the top.

coupling rods); normally one pair is directly driven by the main rod (or connecting rod) which is connected to the end of the piston rod; power is transmitted.

water wheel, wind mill or other rotary motion through a crankshaft and connecting rod.

in the case of a steam locomotive can be very dangerous as a broken connecting rod could puncture the firebox or boiler and cause a steam explosion.

split-single engines from 1905-1939 used a single Y-shaped or V-shaped connecting rod.

engines employed a small scoop on the extremity of the crankshaft or connecting rod to assist with the lubrication of the cylinder walls by means of a splashing.

linear movement of the piston is converted to a rotating movement via a connecting rod and a crankshaft or by a swashplate or other suitable mechanism.

The movement is derived from a vertical link connected to the connecting rod.

engine, a piston rod joins a piston to the crosshead and thus to the connecting rod that drives the crankshaft or (for steam locomotives) the driving wheels.

Synonyms:

piston rod; rod;

Antonyms:

unformed; oblate; prolate; square; amorphous;