Noun:

ক্র্যাঁকশাফ্ট,

crankshaft's Usage Examples:

A crankshaft is a shaft driven by a crank mechanism, consisting of a series of cranks and crankpins to which the connecting rods of an engine is attached.

an eight-cylinder piston engine in which the cylinders share a common crankshaft and are arranged in a V configuration.

engine is a six-cylinder piston engine where the cylinders share a common crankshaft and are arranged in a V configuration.

piston engine where two cylinders are arranged in a line along a common crankshaft.

four-cylinder piston engine where cylinders are arranged in a line along a common crankshaft.

in which the piston completes four separate strokes while turning the crankshaft.

a longitudinal engine is an internal combustion engine in which the crankshaft is oriented along the long axis of the vehicle, front to back.

the crankshaft.

Together with the crank, the connecting rod converts the reciprocating motion of the piston into the rotation of the crankshaft.

final 180 degrees of crankshaft rotation.

The 2020 Triumph Tiger 900 motorcycle uses a "T-Plane" crankshaft where the crankshaft throws are at 90 intervals.

engines, which use a single crankshaft as the power output.

The most common layout was two crankshafts, with the crankshafts geared together (in either.

of an internal combustion engine that synchronizes the rotation of the crankshaft and the camshaft(s) so that the engine's valves open and close at the.

transverse engine is an engine mounted in a vehicle so that the engine's crankshaft axis is perpendicular to the direction of travel.

cylinder to the crankshaft via a piston rod and/or connecting rod.

In a pump, the function is reversed and force is transferred from the crankshaft to the piston.

straight line along the crankcase with all the pistons driving a common crankshaft (straight engine).

In a piston engine, the main bearings are the bearings which hold the crankshaft in place and allow it to rotate within the engine block.

engine, is a two-cylinder piston engine where the cylinders share a common crankshaft and are arranged in a V configuration.

parallel-twins (BSA, Triumph, Norton, AJS ' Matchless) all had 360° crankshafts that, compared to a single, gave twice as many ignition pulses which.

coplanar, the connecting rods cannot all be directly attached to the crankshaft unless mechanically complex forked connecting rods are used, none of which.

Synonyms:

rotating shaft; shaft; reciprocating engine;