Noun:

ক্রশহেড,

crosshead's Usage Examples:

within the piston: unlike the steam engine, there is no piston rod or crosshead (except big two stroke engines).

A crosshead is a mechanism used as part of the slider-crank linkages of long reciprocating engines and reciprocating compressors to eliminate sideways.

This rod attached to a horizontal crosshead, connected at each end to vertical rods (known as side-rods).

of this layout is that the piston rod emerges from the cylinder to the crosshead, but the connecting rod then reverses direction and goes backwards to.

In a piston engine, a piston rod joins a piston to the crosshead and thus to the connecting rod that drives the crankshaft or (for steam locomotives).

The Phillips-head ("crosshead") screw and screwdriver are named after him.

The importance of the crosshead screw design lies in its self-centering.

stationary or marine engines, the gudgeon pin is located in a sliding crosshead that connects to the piston via a rod.

Wärtsilä, with their RTA96-C, and MAN Diesel produce crosshead two-stroke diesel engines in this configuration.

The engine has crosshead bearings so the always-vertical piston rods create a tight seal under.

to move the crosshead up or down.

A range of crosshead speeds can be achieved by changing the speed of the motor.

The speed of the crosshead, and consequently.

Locomotive Works, it featured two pistons moving in parallel, driving a common crosshead and controlled by a common valve gear using a single, complex piston valve.

fixing a crank to its crankshaft, as in a bicycle, or a piston rod to a crosshead, as in a steam engine.

applications MAN Diesel ' Turbo, crosshead diesel engines for marine propulsion Mitsubishi Heavy Industries, crosshead diesel engines for marine propulsion.

eccentric cam mounted on one of the driving axles and linkage from the crosshead.

This cross is made of Pentewan stone; the crosshead is now incomplete as the upper limb is missing.

combination levers were driven, as normal, from the crossheads.

Each expansion link was driven from the crosshead on the opposite side of the engine.

The crosshead became part of the piston, and there was no longer any piston rod.

fitted with a common piston rod with a crosshead which was machined integral with the piston rod.

This crosshead was connected to a lever fitted to the.

gear dispensed with the combination lever which transmitted some of the crosshead motion to the valves.

The primary lead motion is provided by the crosshead arm (9) and the union link (11).

Synonyms:

steam engine; block;

Antonyms:

undock; follower; natural depression;