Noun:

সিলিন্ডারের মাথা,

cylinder head শব্দের বাংলা অর্থ এর উদাহরণ:

দৈর্ঘ্য, কম কম্পন এবং বায়ু শীতল করার উপযুক্ততা (ভালভাবে উদ্ভাসিত সিলিন্ডারের মাথা এবং সংক্ষিপ্ত দৈর্ঘ্যের কারণে) ।

cylinder head's Usage Examples:

In an internal combustion engine, the cylinder head (often informally abbreviated to just head) sits above the cylinders on top of the cylinder block.

(OHC) engine is a piston engine where the camshaft is located in the cylinder head above the combustion chamber.

engine, a head gasket provides the seal between the engine block and cylinder head(s).

consists of the cylinders, coolant passages, oil galleries, crankcase and cylinder head(s).

VR5, uses a narrow V angle and a single cylinder head VR6, uses a narrow V angle and a single cylinder head Flat engines, also known as "horizontally-opposed".

valve (OHV) engine is a piston engine whose valves are located in the cylinder head above the combustion chamber.

A crossflow cylinder head is a cylinder head that features the intake and exhaust ports on opposite sides.

More valves also provide additional cooling to the cylinder head.

This overhead camshaft engine features a crossflow cylinder head design, and directly driven auxiliary units.

better heat conductor, an aluminium cylinder head requires steel valve seat inserts, where a cast iron cylinder head would often have employed integral.

The spark plug's metal shell is screwed into the engine's cylinder head and thus electrically grounded.

engines with a narrow angle between the cylinder banks and a single cylinder head covering both banks of cylinders.

piston rods Alcan aluminium pistons, trapezoid bearings shared with rods cylinder head ' valvetrain cast aluminium alloy; two valves per cylinder, 6 valves.

1957-61, "B type" cylinder head, painted light blue-green, 2 × SU HD6 carburettors Jaguar XK 150 3.

4S - 1957-61, "Straight port" cylinder head, painted orange.

internal-combustion piston engine where some of the major components (such as cylinder head, cylinder block, or crankcase) are formed, usually by casting, as a.

an overhead camshaft driven by a toothed timing belt and an aluminum cylinder head with 8 overhead valves.

chamber in a reciprocating internal combustion engine with a domed cylinder head in the approximate shape of a hemisphere.

engine and its predecessor was the introduction of a new crossflow cylinder head which reduced emissions by moving the intake ports to the right side.

the 1100 (front fork, brakes and some injection parts) and the entire cylinder head assembly from the KZ 650.

Synonyms:

roller; roll; solid;

Antonyms:

ability; rear; cathode; anode;