(ইলেকট্রনিক্স

Noun:

ডিমোডিউলেশন,

demodulation's Usage Examples:

wave and the receiver's local oscillator for the purpose of coherent demodulation.

present and allow synchronizing the phase of the local oscillator in the demodulation circuitry.

typically refer to physical layer protocol duties such as modulation, demodulation, line coding, equalization, error control, bit synchronization and multiplexing.

In phase demodulation the information is contained in the amount and rate of phase shift in.

For demodulation, the demodulation oscillator's frequency and phase must be exactly the same as.

station, the message signal is extracted from the modulated carrier by demodulation.

The passband modulation and corresponding demodulation (also known as detection) is carried out by modem equipment.

(AV) signals needed for television, and performs the following tasks: demodulation; error correction; MPEG transport stream demultiplexing; decompression;.

This comes at the expense of demodulation complexity.

Usually sine and cosine demodulation is performed simultaneously, which is sometimes also referred to as dual-phase demodulation.

The result is a reversed-phase sideband on +1 MHz; on demodulation, this results in unwanted output at 6 – 1 = 5 MHz.

with demodulation and interface logic.

Some lower-end cards lack an onboard processor and, like a Winmodem, rely on the system's CPU for demodulation.

Just as the modulation and demodulation of RF degrades quality, the combining of component signals to form the.

A trade-off is that it has more demodulation errors.

the signal-to-noise ratio (SNR or S/N) of a modulated signal before demodulation.

A demodulator (sometimes detector) is a circuit that performs demodulation, the inverse of modulation.

demodulation's Meaning':

(electronics