eutectic's Usage Examples:

A eutectic system (/juːˈtɛktɪk/ yoo-TEK-tik) from the Greek "εύ" (eu = well) and "τήξις" (tēxis = melting) is an homogeneous mixture of substances that.

In specific proportions, some alloys are eutectic — that is, the alloy's melting point is the lowest possible for a mixture.

Lidocaine/prilocaine is a eutectic mixture of equal quantities (by weight) of lidocaine and prilocaine.

In eutectic mixtures the solidus and liquidus temperatures coincide at a point known as the eutectic point.

At the eutectic point, the solid.

higher than the eutectic temperature of 1274 °C.

This shifts the remaining melt towards its eutectic composition of 43% diopside.

The eutectic is reached at.

neutron spectrum and molten lead or lead-bismuth eutectic coolant.

Molten lead or lead-bismuth eutectic can be used as the primary coolant because lead.

Eutectic bonding, also referred to as eutectic soldering, describes a wafer bonding technique with an intermediate metal layer that can produce a eutectic.

The eutectic mixture is slightly greater than 50% BeF2 and has a melting point of 360 °C.

simultaneous crystallization of quartz and feldspar from a silicate melt at the eutectic point, perhaps in the presence of a water-rich phase.

It is eutectic, fusible alloy with a melting point of approximately 70 °C (158 °F).

It is a eutectic alloy of 50% bismuth, 26.

moves quickly, leaving behind two solid products, as in rapid cooling of eutectic (such as solder) or eutectoid (such as pearlite) systems.

3% carbon in iron and is a eutectic mixture of austenite and cementite.

Mechanical linecasting equipment uses alloys that are close to eutectic.

Lead-Bismuth Eutectic or LBE is a eutectic alloy of lead (44.

Deep eutectic solvents are systems formed from a eutectic mixture of Lewis or Brønsted acids and bases which can contain a variety of anionic and/or cationic.

It is used as an eutectic mixture with lidocaine, 50% w/w, as lidocaine/prilocaine.

pits filled with gravel and water and insulated at the top, as well as eutectic solutions and phase-change materials.

hypereutectic alloy–that is, a metallic alloy which has a composition beyond the eutectic point.

Hypereutectic pistons are made of an aluminum alloy which has much.

Synonyms:

mixture;