অনমনীয় এবং চাপ প্রতিরোধী হচ্ছে সম্পত্তি; সহজে চিরা নয়; কাঠিন্য স্কেলে মাপা

hardnesses's Usage Examples:

layer hardnesses ranging from 1200-1600 HV.

Nickel-based superalloys such as Inconel and Hastalloys will typically have nickel boride layer hardnesses of.

atomization ("granulation") process, available in different sizes and hardnesses.

section, as it cannot be polished as a whole due to gems having different hardnesses.

Manufacturers provide it in a range of hardnesses from very soft to medium—usually from 15 to 40 Shore A.

other products, the cedar wood "The Blackfeet Indian Pencil" in various hardnesses.

High degrees of hardenability are achievable in the alloy, with HRC hardnesses ranging from 24 to 53 depending on the heat treatment.

The two kinds are readily distinguished by their different hardnesses: gypsum alabaster is so soft that a fingernail scratches it (Mohs hardness.

In the range of blade materials' hardnesses, the relationship between hardness and toughness is fairly complex and.

"Kamui" tips come in four different hardnesses: soft, medium soft, medium and hard.

This is because higher hardnesses are associated with lower fracture toughness so stronger, higher hardness.

wheel hardnesses on their skates to optimize turning and acceleration, with a softer "push" wheel.

Freestyle skaters tend to use a mix of hardnesses on skates.

its properties, but generally it is hard (its dominant minerals having hardnesses of around 6 on the Mohs scale).

around Durdle Door is controlled by its geology—both by the contrasting hardnesses of the rocks, and by the local patterns of faults and folds.

pitch copper, whilst machinability is similar to brass - the alloy's hardnesses are increased by precipitation of copper telluride.

Precious Metal Wire also comes in three hardnesses: Dead Soft wire is extremely malleable and can be bent easily into a variety.

Rocks of different colours and hardnesses may be seen.

glycerine–water mixture which is selectively absorbed by the different gel hardnesses, blotted before inking with collotype ink using a leather nap or velvet.

hardnesses's Meaning':

the property of being rigid and resistant to pressure; not easily scratched; measured on Mohs scale

Synonyms:

insensitivity; insensitiveness; callousness; callosity; dullness; insensibility; unfeelingness;

Antonyms:

sensitiveness; sensitivity; unconscientiousness; pleasantness; smoothness;