Adjective:

সংভৃত,

indenter শব্দের বাংলা অর্থ এর উদাহরণ:

এইচএমএএস মেলবোর্ন ১৩ আগস্ট রোজেল দ্বীপ থেকে কয়লাবাহী জাহাজ অ্যালকোন্ডার কয়লা সংভৃত করে ।

indenter's Usage Examples:

indentation hardness of materials through the scale of penetration of an indenter, loaded on a material test-piece.

The Rockwell test measuring the depth of penetration of an indenter under a large load (major load) compared to the penetration made by a preload.

the required calculations are independent of the size of the indenter, and the indenter can be used for all materials irrespective of hardness.

The tip end of the indenter can be made sharp, flat, or rounded to a cylindrical or spherical shape.

finely etched indenter leaves a much easier to read indentation than a smooth indenter.

The indentation that is left after the indenter and load are removed.

hardness depends on the depth of the indenter after it has been applied for 15 seconds on the material.

If the indenter penetrates 2.

measurements or assumptions pertaining to the area of contact between indenter and sample, the method uses the load-displacement data registered in the.

The geometry of this indenter is an extended pyramid with the length to width ratio being 7:1 and respective.

The load placed on the indenter tip is increased as the tip penetrates further into the specimen and soon.

Berkovich tip has the same projected area-to-depth ratio as a Vickers indenter.

The flat tip indenter is lowered onto the fiber using a CCD camera to guide the indenter downwards 2.

Progressive de-bonding The indenter touches the fiber.

Berkovich, Russian scientist and inventor of the Berkovich hardness indenter Eyal Berkovich (born 1972), Israeli football player Miki Berkovich (born.

5 mm up to the diameter of the indenter.

The variables k and n are also dependent on the size of the indenter.

To conduct an IFD test, a circular flat indenter with a surface area of 323 square centimeters (50 sq.

dividing the maximum load by the residual imprint of the indenter, which can be different from the indenter section because of sink-in or pile-up phenomena.

pyramidal diamond indenter; and Rockwell hardness test – using a diamond cone indenter.

In all these, a process is defined for loading the indenter, measuring.

A Hertzian cone is often 104 degrees when created by an indenter.

originally defined for spherical indenters, but can be applied to any indenter shape.

In the Knoop test, a diamond indenter in the shape of an elongated pyramid is forced into a polished (but not.