isolators's Usage Examples:

Opto-isolators prevent high voltages from affecting the system receiving the signal.

Commercially available opto-isolators withstand input-to-output.

Vocabulary ISO 14644-7: Separative devices (clean air hoods, gloveboxes, isolators and minienvironments ISO 14644-8: Classification of airborne molecular.

isolation is a vast subject, since there are many types of passive vibration isolators used for many different applications.

infrastructure RF subsystems, isolators, lighting and display solutions[buzzword], mixers, modulators, optocouplers, opto-isolators, phase shifters, PLLs/synthesizers/VCOs.

YIG based Faraday isolators reach isolations higher than 30 dB.

Optical isolators are different from 1/4 wave plate based isolators[dubious – discuss][clarification.

Network isolators are installed as part of a wired Ethernet system as galvanic isolators to reduce the potential for electrical injury and limit the extent.

biological products and antibody production services, flexible film isolators, transportation services, and stock and strain elimination.

TGG can be used in optical isolators for laser systems, in optical circulators for fiber optic systems, in.

ferrite-based isolators are classified into four categories: terminated circulators, Faraday rotation isolators, field-displacement isolators, and resonance.

To avoid this, vibration isolators (flexible sections) are normally inserted into the duct immediately before.

used for amplitude modulation of light, and are the basis of optical isolators and optical circulators; such components are required in optical telecommunications.

basis of various high-frequency electronic devices, such as resonance isolators or circulators.

Barrier isolator is a general term that includes two types of devices: isolators and restricted access barriers (RABS).

It features seismic base isolators on both ends to withstand earthquakes.

Opto-isolators transmit information by light waves.

teams) comprising a portable containment laboratory along with its transit isolators for patient transport.

Standards in some countries for safety may require either local motor isolators or lockable overloads (which can be padlocked).

280 base isolators, each 20 inches (51 cm) high, and between 36 inches (91 cm) and 44 inches (110 cm) in diameter.

Installing the isolators required excavating.