Noun:

ক্রীতদাসবৎ দায়াবদ্ধ কৃযক,

kerf's Usage Examples:

The kerf depends on several factors:.

teeth called "rakers" designed to clean out the cut strips of wood from the kerf.

If the kerf began closing, causing the saw to bind, wedges would be inserted behind the sawblade in order to keep the kerf open.

as a hole cutter, is a saw blade of annular (ring) shape, whose annular kerf creates a hole in the workpiece without having to cut up the core material.

of material removed (that is, the kerf) by each machine in the cutting process.

To adjust for this variation of kerf, the self-similar property of the.

As for other saws they are set from side to side to provide a kerf or clearance when sawing, but the set of a hacksaw changes gradually from.

fashion against a fixed die, removing small bits of metal and leaving a kerf approximately 6 mm wide.

Surface finish is better and kerf width is narrower than those for other thermal cutting processes.

railways would not accept ties cut with a saw, as it was claimed that the kerf of the saw splintered the fibres of the wood, leaving them more likely to.

minimum radius of a curve is determined by the width of the band and its kerf.

requires a wide blade – commonly 2 to 3 inches (52–78 mm) – with a small kerf to minimize waste.

The kerf of a chainsaw cut is wide, relative to the kerf of a bandsaw mill or circular saw.

Unlike traditional mills, they used a thin-kerf blade of the type used on a band saw rather than a circular blade, which.

a single reference line for one side of the kerf, while others provide two lines to reflect the total kerf width.