Adverb:

যে কোন পথে, যেমন করিযাই হউক, অবস্থা যাহাই হউক না কেন, সকল অবস্থাতেই,

keyway শব্দের বাংলা অর্থ এর উদাহরণ:

অর্থ সকল অবস্থাতেই মানুষকে কষ্ট দেয় ।

সকল অবস্থাতেই এটি মানুষ গ্রহণ করলেও, মূলত এর লার্ভাকে সবচেয়ে সুস্বাদু ধরা হয় ।

সকল অবস্থাতেই স্বাস্থ্যকর্মীদেরকে ক্লিনিকগুলোতে পাঠানো হতো জটিলতায় আক্রান্ত অঞ্চলগুলোতে ।

keyway's Usage Examples:

For a key to function, the shaft and rotating machine element must have a keyway and a keyseat, which is a slot and pocket in which the key fits.

A keyhole (or keyway) is a hole or aperture (as in a door or lock) for receiving a key.

Lock keyway shapes vary widely with lock manufacturer, and many.

Schlage uses milled complex keyway shapes to mechanically prevent some non-OEM keys from entering or operating a lock.

New keyway designs may be protected.

measurable difference between a key and the size required to fit and operate the keyway of its paired lock.

seconds, or for those players who are leaving (or attempting to leave) the keyway.

The blank has a specific cross-sectional profile to match the keyway in a corresponding lock cylinder.

An alternative to splines is a keyway and key, though splines provide a longer fatigue life, and can carry significantly.

The plug has a straight-shaped slot known as the keyway at one end to allow the key to enter the plug; the other end may have a.

Nuclear Regulation (ONR) had raised concerns over the number of fractures in keyways that lock together the graphite bricks in the core.

major keyway is 4 mm deep, and there is a corresponding flat protruding into the interior of the shroud to accommodate it.

The width of the major keyway defines.

metal consisting of two parts: the bit or blade, which slides into the keyway of the lock and distinguishes between different keys, and the bow, which.

are two basic types of tension: "bottom of the keyway" and "top of the keyway".

The bottom of the keyway wrenches is typically shaped like a letter "L".

had been cleared and work on the keyway was almost complete when finance to build the dam was withdrawn, the keyway and plinth were covered over with.

Commonly machined surfaces include circular and non-circular holes, splines, keyways, and flat surfaces.

A six-pin interchangeable core with an 'A' keyway and individual chamber capping in an ANSI/BHMA 626 satin chrome finish.

As the key slides into the lock through the keyway, the wards align with the grooves in the key's profile to allow or deny.