<< lashings lass >>

lasing Meaning in Bengali







lasing's Usage Examples:

the gain medium of a laser; when a laser is operating it is said to be "lasing".


The lasing threshold is the lowest excitation level at which a laser's output is dominated by stimulated emission rather than by spontaneous emission.


The active laser medium (also called gain medium or lasing medium) is the source of optical gain within a laser.


bringing the carrier density within that region from below to above the lasing threshold.


The lasing medium is usually a dye doped into the liquid crystal.


that uses an organic dye as the lasing medium, usually as a liquid solution.


Compared to gases and most solid state lasing media, a dye can usually be used.


the lasing medium.


The two most studied lasing media.


1972 and was the first ICF laser ever to use neodymium doped glass as the lasing medium.


Then, these dopant atoms actually carry out the lasing process in the crystal.


diode in which a diode pumped directly with electrical current can create lasing conditions at the diode's junction.


one photon is coupled into the lasing mode by spontaneous emission during the photon-decay time τ c {\displaystyle.


The mission's investigators thought the rock was a basalt prior to lasing, which was confirmed by preliminary results.


Improvements in modulation bandwidth, lasing threshold, relative intensity noise, linewidth enhancement factor and temperature.


(neodymium-doped yttrium aluminum garnet; Nd:Y3Al5O12) is a crystal that is used as a lasing medium for solid-state lasers.


Neodymium-doped yttrium lithium fluoride (Nd:YLF) is a lasing medium for arc lamp-pumped and diode-pumped solid-state lasers.


implies lasing over a considerable bandwidth, quite contrary to the very narrow bandwidths typical of continuous wave (CW) lasers.


The lasing medium in.


As in all neodymium-doped laser crystals, the lasing action of Nd:YVO4 is due to its content of neodymium ions, which may be.


of exciton-polaritons in semiconductors to achieve ultra-low threshold lasing.


The pump power must be higher than the lasing threshold of the laser.


transitions with sufficient energy to cross the threshold required for lasing.



lasing's Meaning in Other Sites