সম্পূরক বাদাম করে একটি প্রাথমিক বাদাম নিচে মাতাল হয় স্খলন থেকে এটা রোধ করার জন্য

locknuts's Usage Examples:

Jam nuts, other types of locknuts, lock washers, and thread-locking fluid are ways to prevent vibration from.

Security locknuts are fastened onto a mating bolt to form a bolted joint.

catch-all category that encompasses designs known as oval locknuts or non-slotted hex locknuts,.

Straight Pipe Thread for Loose-fitting Mechanical Joints with Locknuts For use with locknuts NPSM National pipe straight–mechanical American National Standard.

spokes on the same side of the wheel, and to center the rim between the locknuts of the hub (known as dishing the wheel).

Lock washers, locknuts, jam nuts, and safety wire may be used in conjunction with thread-locking.

Incorrect self-locking locknuts had been installed in the elevator operating system, which maintenance.

crossheads were screwed to the ends of the valve spindles and secured with locknuts.

2012, found that the probable cause of the crash was reused single-use locknuts in the left elevator trim tab system that loosened.

Widely spread are locknuts, that won't fall of as easy.

10-32 UNF bolts, usually an Allen or Phillips head, and matching nylon locknuts.

rods, rocker arms and similar adjustable pieces are often equipped with locknuts which are thinner than standard nuts, due to space limitations.

This entire target assembly was secured at both ends with locknuts.

Valve clearance was adjustable by screws and locknuts on the rocker arms.

Lock washers, locknuts, jam nuts, and thread-locking fluid are ways to prevent vibration from.

retention that do not rely on safety wire at all, such as lock washers, locknuts, jam nuts, thread-locking fluid, castellated nuts and cotter pins, all.

purposes, but is connected during normal service by either a locking system (locknuts for instance) or two or more screws.

locknuts's Meaning':

supplementary nut that is screwed down on a primary nut to prevent it from loosening

Synonyms:

safety nut; nut;

Antonyms:

spread;