operand's Usage Examples:

triggered architectures (TTA), only operand(s).

The Forth virtual machine and other "0-operand" instruction sets lack any operand specifier fields, such as some.

In mathematics an operand is the object of a mathematical operation, i.

specify an operand.

The encoding of the six bit operand addressing.

The inputs to an ALU are the data to be operated on, called operands, and a code indicating the operation to be performed; the ALU's output.

When the operand is a destination (INC operand, DEC operand) or the operation already includes an immediate source (MOV operand,#data, CJNE operand,#data.

two-operand form a = a + b can now use a non-destructive three-operand form c = a + b, preserving both source operands.

Originally, AVX's three-operand format.

Operands are always 1 byte long, and some instructions support two operands, such as "move 8-bit immediate to 8-bit.

Chain input expects two operands and an operator.

whether the operand is alphanumeric isalpha iswalpha checks whether the operand is alphabetic islower iswlower checks whether the operand is lowercase.

is limited to special "load far" instructions; most operations' memory operands can access at most 128K (a 16-bit base address plus 16-bit offset).

bitwise operations are presented as two-operand instructions where the result replaces one of the input operands.

architecture identify the operand(s) of each instruction.

An addressing mode specifies how to calculate the effective memory address of an operand by using information.

transfer the additional bytes of the operand itself.

If an 8087 instruction with a memory operand called for that operand to be written, the 8087 would ignore.

COP8 operands are listed in destination, source order.

Most instructions have the accumulator A as one of the operands.

The other operand is generally.

operators are unary operators that add or subtract one, to or from their operand, respectively.

It checks if the operands are available (RAW) and if execution unit is free (Structural hazard) before.

The four-operand form (FMA4) allows a, b, c and d to be four different registers, while the three-operand form (FMA3) requires that d.

were split into a 4-bit opcode field (least-significant bits) and a 9-bit operand address field (most-significant bits).

used to deal with hazards, including pipeline stalls/pipeline bubbling, operand forwarding, and in the case of out-of-order execution, the scoreboarding.

Synonyms:

quantity;

Antonyms:

standard; nonstandard;