overtightened's Usage Examples:

least halfway down the stock of the reed and the screws must not be overtightened, in order to allow free vibration and not distort the reed.

The threads may gall if overtightened or have been corroding in salty air, so a liberal coating of lanolin.

If the nut is overtightened the ferrule will deform improperly causing the joint to fail.

A (somewhat dirty and overtightened) wire clamp, used on an automotive radiator.

The port line was overtightened[further explanation needed] as it was connected to the post of the ground.

Additionally, it can push the cheeks against the horse's teeth when overtightened, which is painful.

Two of the pumps failed to start as a result of overtightened packing.

box cover plate fixed to the front end of the boiler were probably overtightened, when it was removed for tube cleaning.

There were also problems with the shells cracking under the pressure of overtightened lugs and exposure to freezing temperatures.

forwards, where on other Sturmey-Archer gear hubs this would indicate an overtightened left hand bearing cone.

mounting rail for the mounting arrestment lever, preventing it from being overtightened, the serial number on the receiver that the mount covered was now repeated.

with self-adjusting optimal tension, which avoids tissue damage due to overtightened sutures and does support healing and regeneration.

the other was broken and had damaged threads commensurate with being overtightened or jammed, which twisted the head off, or came close to doing so.