Verb:

Preheat,

preheating's Usage Examples:

pump that produces the actual wave, the sprayer for the flux and the preheating pad.

Hot blast refers to the preheating of air blown into a blast furnace or other metallurgical process.

The process has three stages: preheating, blanching, and cooling.

which are conductive even at room temperature and therefore need no preheating.

high temperature by using regenerative preheating of fuel and air for combustion.

In regenerative preheating, the exhaust gases from the furnace are.

This engine provides preheating as well.

The VCS mode is typically used for weakly exothermic reactions that require preheating prior to ignition.

For that reason, preheating is particularly critical (the nozzle may require cooling).

Preheating is by glow plugs with automatic control of preheating time.

intended to reduce energy consumption, or to perform useful function such as preheating a fluid.

between 1,350–1,400 °C (2,460–2,550 °F), was caused by the preheating of air blasts.

alternate configurations such as a split-flow set up or feed and air preheating can be used to process leaner feeds.

A typical curing cycle involves a preheating stage, known as the "delay period" ranging from 2 to 5 hours; heating.

Aermet is weldable with no preheating needed.

when part temperature rises slowly and to a low maximum during a baking (preheating) process.

and is composed of multiple controlled zones which include zones for preheating, binder burn out, heating, firing, and cooling.

included a warning light on the dash to indicate how long the preheating should last.

The preheating phase was also made to be automatically activated when the.

These experiments led Schmidt to forward his "preheating hypothesis.

" This hypothesis proposes that preheating was a critical component to Early Iron Age.

Synonyms:

heat; heat up;

Antonyms:

anestrus; coldness; cool;