Noun:

স্লিপ রিং,

slip ring শব্দের বাংলা অর্থ এর উদাহরণ:

স্লিপ রিং (এক্সাইটার) এর মধ্য দিয়ে ডিসি কারেন্ট সরবরাহ করে কিংবা একটি স্থায়ী চুম্বক ।

এক্সাইটার থেকে বিদ্যুত কারেন্ট ব্রাশ ও স্লিপ রিং হয়ে কয়েলে জায় ।

slip ring's Usage Examples:

A slip ring is an electromechanical device that allows the transmission of power and electrical signals from a stationary to a rotating structure.

A wound-rotor motor, also known as slip ring-rotor motor, is a type of induction motor where the rotor windings are connected through slip rings to external.

Power is carried to the motors via slip ring brushes at the center and cables.

circuit carries much less power than the armature circuit, making the slip ring connections smaller and less costly; only two contacts are needed for.

Unfortunately, using a slip ring assembly or standard electrical slip ring may cause problems due to electrical noise and degradation.

Originally this was accomplished by affixing a copper or brass commutator or 'slip ring' to the shaft, with springs pressing braided copper wire 'brushes' onto.

This may be used as a dummy load or as a starting resistor for large slip ring motors.

the ability to rotate in either direction without limit, thanks to the slip ring and brush system that supplied electrical/audio to and from the stage.

to be the aft slip ring, which carried flight data from the instrumented rotor blades to the data recorders in the cabin.

The slip ring bearings seized.

They are used in the rotor circuits of large slip ring induction motors to control starting current, torque and to limit large.

Placing the field coils on the rotor allows for an inexpensive slip ring mechanism to transfer high-voltage, low current power to the rotating.

addition, where signals and power need to pass to the model, some form of slip ring arrangement is required.

review the cause of malfunction was found out to be electric arcing in slip ring of one of the solar panels.

AC motors' commutation can be achieved using either a slip ring commutator or external commutation, can be fixed-speed or variable-speed.

windings on the rotor through a commutator, a combination of rotating slip ring and switches.

Synonyms:

dingdong; peal; knell; tintinnabulate; dong; sound; go; ding;

Antonyms:

linger; stay in place; precede; descend; go;