Noun:

বাষ্প বুকে,

steam chest's Usage Examples:

valve consists of two piston heads on a common spindle moving inside a steam chest, which is essentially a mini-cylinder located either above or below the.

The steam chest and valves lay above the front carrying axle, and there was sufficient clearance to allow the steam chest cover to be removed.

such as bar frames, and the smokebox being a separate piece from the steam chest, the latter being a "saddle" connecting to the cylinders, upon which.

link, and the whole assembly worked inside the exhaust space of the steam chest.

with use of a blowing agent, followed by expansion into a mold in a steam chest - the process is similar to that used to make expanded polystyrene foam.

The class were fitted with a steam chest and slide valves located beneath the cylinders.

hollow piston valves were mounted on the same valve spindle in a common steam chest, with the high-pressure valves arranged for inside admission and the.

a more modern cylinder design, having straighter ports and a larger steam chest volume than the other two classes.

steam cylinder connected directly to the steam chest.

When the throttle was opened, the pressure in the steam chest would open the damper, which would be.

Exhaust steam was extracted from the steam chest and fed through a 100 mm diameter pipe under the locomotive to the tender.

The cylinder, steam chest, cross-head guide, and the boxes for the crankshaft bearings were all.

Cylinder and steam chest castings are identical to C17 Class.

it was converted to a superheated locomotive with new cylinder and steam chest castings that incorporated piston valves.

Inside each steam chest is a sliding valve that distributes the steam via ports that connect the steam chest to the ends of the cylinder.

The steam chest covers of the low-pressure cylinders were designed with inclined joint.

The steam cocks (used to blow out water condensate from the steam chest), the force pump and the firebox bellows were also driven by the crankshaft.

one on each engine unit, supplied one feed to each cylinder and each steam chest, two to the ball joints and two to the tail-end extensions of the piston.

problems with seizing of the phosphor bronze sleeves in the cast iron steam chest, with leakage in the glands and piston rings.

Synonyms:

steam engine; chamber;

Antonyms:

hardness; thinness; repair; success; rich;