Noun:

কাঠামোগত সদস্য,

structural member's Usage Examples:

This contrasts with a mullion, a vertical structural member.

In a fixed-wing aircraft, the spar is often the main structural member of the wing, running spanwise at right angles (or thereabouts depending on wing.

tree branch (sometimes referred to in botany as a ramus) is a woody structural member connected to but not part of the central trunk of a tree (or sometimes.

The keelson or kelson is a reinforcing structural member on top of the keel in the hull of a wooden vessel.

A sternpost is the upright structural member or post at the stern of a (generally wooden) ship or a boat, to which are attached the transoms and the rearmost.

purline, purloyne, purling, perling) is a longitudinal, horizontal, structural member in a roof.

A joist is a horizontal structural member used in framing to span an open space, often between beams that subsequently transfer loads to vertical members.

A headstock of a rail vehicle is a transverse structural member located at the extreme end of the vehicle's underframe.

Any rod or bar-shaped structural member designed to prevent the separation of two parts, as in a vehicle.

A reinforced concrete column is a structural member designed to carry compressive loads, composed of concrete with an embedded steel frame to provide.

On a vessel's hull, a rib is a lateral structural member which runs between gunwales and sprouts from the keel.

connected by horizontal beams (rafters were traditionally the only structural member that was neither horizontal nor vertical).

A mullion acts as a structural member, in most applications the mullion transfers wind loads and weight.

engineering, a girt, also known as a sheeting rail, is a horizontal structural member in a framed wall.

A structural keel is the bottom-most structural member around which the hull of a ship is built.

Supports can be either at the end or at any intermediate point along a structural member or a constituent part of a building and they are referred to as connections.

Here, a former is a structural member of an aircraft fuselage, of which a typical fuselage has a series.

concrete have similar coefficients of thermal expansion, so a concrete structural member reinforced with steel will experience minimal differential stress.

upper, inner longitudinal structural member of the hull, to which topside panels are fixed.

Keel: the main structural member of a traditional vessel, running.

Synonyms:

upright; sill; plate; tread; vertical; construction; beam; structure; riser; support; bracing; brace;

Antonyms:

unerect; inclined; horizontal; unrighteous; cathode;