Noun:

সূর্য গিয়ার্ মধ্যে নির্মিত হয়েছে,

sun gear's Usage Examples:

In this simplified case, the sun gear is fixed and the planetary gear(s) roll around the sun gear.

the axle of the sun gear by a link that freely rotates around the axis of the sun gear and keeps the planet gear engaged with the sun gear but does not contribute.

of being relatively compact along the length of its axis (that is, the sun gear shaft).

couple with the small sun gear and co-rotate at a fixed gear ratio with respect to it.

The outer planets couple with the large sun gear and co-rotates with.

unit (band on, in reduction) through the fluid coupling to the rear unit sun gear.

A number of planet gears are arranged around and engaged with this sun gear, and therefore rotate.

output sun gear independently of the input sun gear position.

if the driver were to hold the steering wheel (and therefore the input sun gear) stationary.

It uses the planet carrier as the input with the sun gear as the output, and the annulus normally locked.

As it rotates it applies a torque to the sun gear, just as for a crank, and so causes it to rotate.

The sun gear (in yellow above) is mounted solidly to the axle and is thus fixed relative.

The crankshafts were fitted with gears, which drove a sun gear arrangement.

reduction or spur gear Internal spur gear Farman or bevel planetary type Fixed sun gear Fixed internal gear Belt drive Epicyclic gearing The Rolls-Royce Falcon.

shows an inner circle with four planetary gears spaced equally around a sun gear.

differently sized cogs machined from a common shaft to engage the gear ring and sun gear separately, while the close-ratio three-speeds, and hubs with four or more.

Legend: A : Brake (blocks s2 sun gear) B : Brake (blocks r3 ring gear) C : Brake (blocks c1 carrier gear) D :.

the vehicle wheels are turning, the ring gear will rotate, causing the sun gear to rotate as well (the engine inertia will keep the carrier gear stationary.

converted, that is increased, is transmitted to the planetary carrier via the sun gear of the turbine gear.

input shaft) B : Clutch (couples s1 with input shaft) C : Brake (blocks s1 sun gear) D : Brake (blocks r2 ring gear) E : Clutch (couples c3+r4 with input shaft).

Synonyms:

gear wheel; epicyclic gear train; gear; geared wheel; epicyclic train; cogwheel;

Antonyms:

fresh; destroyed; new;