একটি লেদ মেশিন অস্থাবর অংশ গঠিত যে headstock সঙ্গে প্রান্তিককরণ মধ্যে বিছানা বরাবর স্লাইড এবং অবস্থান workpiece মুক্ত শেষ সমর্থন করার জন্য মধ্যে লক করা সমর্থন

tailstock's Usage Examples:

These machines consist of (at the least) a headstock, bed, carriage, and tailstock.

A tailstock, also known as a foot stock, is a device often used as part of an engineering lathe, wood-turning lathe, or used in conjunction with a rotary.

A machine tool may have several spindles, such as the headstock and tailstock spindles on a bench lathe.

part is long then it may be supported with the help of an accompanying tailstock.

) by mounting them on the toolpost, tailstock, or both.

In this configuration a tailstock can also be used, thus holding the workpiece "between centers.

The counterpoint to the headstock is the tailstock, sometimes referred to as the loose head, as it can be positioned at any.

Noting signature abrasions on the tailstock, and excessive fluid in the lungs, they concluded that the animal had.

wood is held on the lathe either by both ends (between the headstock and tailstock) or by one end only using a lathe chuck Wood is generally removed by running.

between centres, a 'dead centre' is used in the headstock as well as the tailstock.

be oriented in the same direction The protruding movable shaft in the tailstock of a lathe The non-rotating shaft that houses the spindle in a pillar.

lathe e) using a form tool f) by the offsetting of the tailstock - this method more suited for shallow tapers.

In many lathe tailstocks, the tool is removed by fully withdrawing the quill into the tailstock, which brings the tool up against.

The tailstock was also of completely new design.

clamped against the block by a pressure pad, which is attached to the tailstock.

the headstock of the lathe which includes the drive mechanism and the tailstock support, which only rotates if its center is 'live' or supported by a.

have four main components: the bed, the headstock, the carriage, and the tailstock.

Nowadays the surrounding objects (chuck, clamps, fixture, tailstock, and more) are included in the 3D models, and the simulation is much like.

tailstock's Meaning':

support consisting of the movable part of a lathe that slides along the bed in alignment with the headstock and is locked into position to support the free end of the workpiece

Synonyms:

support;

Antonyms:

disallow; forbid;