লিভার যে অন্য কিছু আলতো চাপুন করার জন্য সরানোর সময়

Noun:

ট্যাপিট্,

tappet's Usage Examples:

A tappet is most commonly a component in an internal combustion engine which converts the rotating motion of the camshaft into linear motion of the valves.

actuated by a rocker arm, finger or bucket tappet.

Overhead camshaft engines use fingers or bucket tappets, upon which the cam lobes contact.

A hydraulic tappet, also known as a hydraulic valve lifter or hydraulic lash adjuster, is a device for maintaining zero valve clearance in an internal.

and lowered by a rotating lobe of the camshaft (either directly or via a tappet (lifter) and pushrod) while the other end acts on the valve stem.

affected by the adjustment of the valve mechanism, and particularly by the tappet clearance.

Gudgeon pin Hydraulic tappet Main bearing Obturator ring Oil pump Piston Piston ring Poppet valve Pushrod Rocker arm Sleeve valve Tappet Electrical components.

tappet and valve are commonly separate, allowing the valve to remain in a well-defined fully open position throughout the stroke, however the tappet is.

This engages a second shaft known as the tappet shaft or wiper shaft whose job is to lower the treadles and throw the shuttle.

have both hydraulic tappet or hydraulic valve lifters, solid lifters and 1.

5 ratio rockers with an adjustment thread for tappet clearance.

also known as tappet shedding, is the control of the movement of heald shafts in weaving simple constructions by means of cams or tappets.

It is relatively easy to use roller tappets in conventional valvetrains, although it does add considerable moving mass.

tappet's Meaning':

a lever that is moved in order to tap something else

Synonyms:

lever;

Antonyms:

stiffen; close;