কাঠ এক টুকরা যে একটি খাঁজ কাটা মধ্যে মাপসই করা হবে এবং একটি খাঁজ কাটা যৌথ গঠনের চূড়ান্ত করা হয় শেষে একটি অভিক্ষেপ

Noun:

টেনন্,

tenons's Usage Examples:

The shoulder plane is used to trim the shoulders and faces of tenons.

as a French flush-cut saw is designed for trimming the ends of dowels, tenons, and other protrusions flush with a surface.

Tusked through tenons used on a French granary.

in woodworking for precise work, such as cutting dovetails, mitres, or tenons in cabinetry and joinery.

especially when made with circular tenons, triangular frames remain rigid even if they are joined by bearings.

If the tenons are tusked then the chair may.

The use of pegged mortises and tenons in shipbuilding spread westward from the Levantine littoral.

They can also cut joinery such as mortises and tenons.

much larger tenons.

The width of a mortise can be up to 14 mm, its length up to 140 mm and its depth up to 70 mm, thus allowing for tenons with a depth.

similar to a veneer saw, that is designed for trimming the ends of dowels, tenons, and other protrusions flush with a surface.

entailed laying timbers across each other horizontally, with tenons cut into the ends.

These tenons would then be inserted into vertical posts.

The hull was constructed primarily of Aleppo pine, except for the tenons and the false keel which were made of oak.

in that it is constructed from thirteen sections of bone connected using tenons and sockets (with bronze ferrules) rather than the long, bronze tube described.

Andokides Painter had a thorough working knowledge of carpentry practices: tenons and rails are accurately depicted, conforming to woodworking practices and.

edges, chamfering, routing grooves and dados, dovetails, even mortise and tenons.

Long tenons project through the sill plate.

In traditional timber frame joinery, mortises and tenons were typically two inches (51 mm) wide and two inches (51 mm) from the edge.

constituées de montant en bois de frêne ou de hêtre, assembles par mortaises, tenons et chevilles » Musée de l'Aventure Peugeot.

tenons's Meaning':

a projection at the end of a piece of wood that is shaped to fit into a mortise and form a mortise joint