Noun:

প্রতিপাল্য ব্যক্তি,

tensioner's Usage Examples:

A tensioner is a device that applies a force to create or maintain tension.

The force may be applied parallel to, as in the case of a hydraulic bolt tensioner.

A marine riser tensioner is a device used on an offshore drilling vessel which provides a near constant upward force on the drilling riser independent.

A guideline tensioner is a hydropneumatic device used on an offshore drilling rig that keeps a positive pulling force on the guidelines from the platform.

The belt may also be guided by an idler pulley and/or a belt tensioner (which may be spring-loaded, hydraulic, or manual).

Multi-jackbolt tensioners (MJT) are an alternative to traditional bolted joints.

Timing chain tensioner".

CS1 maint: discouraged parameter (link) "11311743187 chain tensioner".

Instead of a conventional clutch, a pulley belt tensioner could be moved, allowing the leather drive belt to slip.

A Serpentine belt with hydraulic tensioner powers the a/c compressor, the water pump and (via a freewheeling pulley.

introduced few changes, however during its production the rear chain tensioner was added.

Connecting rods and crankshaft were strengthened, as were the tensioner and cam chain, while the transmission got heat-treated surface gears.

Increasingly common recent uses may include the tensioner for a timing belt or variators for variable valve timing systems.

and needs another means of chain-tensioning, by a derailleur, chain tensioner, or eccentric bottom bracket or rear hub.

A Conductor tensioner unit (CTU) can be used in shallow water on jackup rig to withstand such.

This requires a sprung chain tensioner, similar to a rear derailleur, to be used.

A superbolt, or multi-jackbolt tensioner is an alternative type of fastener that retrofits or replaces existing.

The camera had a film tensioner which held the film flat against the pressure plate, the first implementation.

A belt tensioner is a device designed to maintain tension in the engine's timing belt.

There is a spring device in the belt tensioner where the bearing.

It is common to replace the timing belt tensioner at the same time as the belt is replaced.