Noun:

তাপপ্রয়োগে নমনীয় করা পদার্থ,

thermoplastic's Usage Examples:

A thermoplastic, or thermosoftening plastic, is a plastic polymer material that becomes pliable or moldable at a certain elevated temperature and solidifies.

English), or carbon-fiber-reinforced plastics, or carbon-fiber reinforced-thermoplastic (CFRP, CRP, CFRTP, also known as carbon fiber, carbon composite, or.

Thermoplastic elastomers (TPE), sometimes referred to as thermoplastic rubbers, are a class of copolymers or a physical mix of polymers (usually a plastic.

(PBT) is a thermoplastic engineering polymer that is used as an insulator in the electrical and electronics industries.

It is a thermoplastic (semi-)crystalline.

to seal products, packaging, and other thermoplastic materials using heat.

This can be with uniform thermoplastic monolayers or with materials having several.

usually thermosets (requiring vulcanization) but may also be thermoplastic (see thermoplastic elastomer).

A thermoplastic-sheathed cable (TPS) consists of a toughened outer sheath of polyvinyl chloride (PVC) thermoplastic, covering one or more individual annealed.

An Acrylic resin is a thermoplastic or thermosetting plastic substance typically derived from acrylic acid, methacrylic acid and acrylate monomers such.

of raised strips using thermoplastic is called profile thermoplastic markings.

The markings are created by fusing thermoplastic to the pavement and create.

hardened, a thermoset cannot be melted for reshaping, in contrast to thermoplastic polymers which are commonly produced and distributed in the form of.

The company produces the instruments from a natural fibre-reinforced thermoplastic through a patented injection moulding process.

Low-density polyethylene (LDPE) is a thermoplastic made from the monomer ethylene.

The term usually refers to thermoplastic materials rather than thermosetting ones.

(approximately 4 to 30%), is referred to as thermoplastic ethylene-vinyl acetate copolymer and is a thermoplastic elastomer material.

Polyether ether ketone (PEEK) is a colourless organic thermoplastic polymer in the polyaryletherketone (PAEK) family, used in engineering applications.

fabrication, is a 3D printing process that uses a continuous filament of a thermoplastic material.

The wash durability of a calendared finish on thermoplastic fibers like polyester is higher than on cellulose fibers such as cotton.

High-density polyethylene (HDPE) or polyethylene high-density (PEHD) is a thermoplastic polymer produced from the monomer ethylene.

Synonyms:

thermoplastic resin; saran; celluloid; plastic;

Antonyms:

natural; destructive; inelastic; unimpressionable;