thyristors's Usage Examples:

Other sources define thyristors as more complex devices that incorporate at least four layers of alternating.

to normal thyristors, are fully controllable switches which can be turned on and off by their third lead, the gate lead.

Normal thyristors (silicon-controlled.

rectifiers and thyristors as synonymous, other sources define silicon-controlled rectifiers as a proper subset of the set of thyristors, those[which?].

voltage controller or AC regulator is an electronic module based on either thyristors, TRIACs, SCRs or IGBTs, which converts a fixed voltage, fixed frequency.

These are thyristors or other controlled switching solid-state switches, which effectively.

1970s, semiconductor devices as thyristors, integrated gate-commutated thyristors (IGCTs), MOS-controlled thyristors (MCTs) and insulated-gate bipolar.

The static inverters are equipped with thyristors and designed for a voltage of 100 kV and a maximum transmission rate of.

Two thyristors are connected as a phase controlled rectifier (PCR).

the advent of semiconductor rectifiers, such as diodes, thyristors and gate turn-off thyristors (GTOs) in the 1970s.

Since the 1960s thyristors have replaced thyratrons in most low- and medium-power applications.

MCTs are similar in operation to GTO thyristors, but have voltage controlled insulated gates.

DIACs have no gate electrode, unlike some other thyristors that they are commonly used to trigger, such as TRIACs.

TRIACs are a subset of thyristors (analogous to a relay in that a small voltage and current can control.

utilizing Ward Leonard control machines and later solid-state converters (thyristors), however modern large hoists use alternating current drives that are.

since the mid-1970s, solid state devices such as thyristors have been used.

Converters using thyristors or mercury-arc valves are known as line commutated.

controlled by reverse-parallel-connected silicon-controlled rectifiers (thyristors), but in some circumstances with three-phase control, the control elements.

Line-commutated converters (LCC) used mercury-arc valves until the 1970s, or thyristors from the 1970s to the present day.

series-connection of thyristors; in such cases the thyristor valve is simply an inverse-parallel connection of two thyristors.

In addition to the thyristors themselves.

The inverter may use thyristors, IGCTs or IGBTs.