trunnions's Usage Examples:

In a cannon, the trunnions are two projections cast just forward of the center of mass of the cannon.

the West Point foundry with trunnions.

Subsequent rifles were cast without trunnions and bronze trunnion band and trunnions were added.

There were several problems with It´s buffers and trunnions, along with accuracy issues in it´s INS Keafott KN-4051 fire control system.

1, light blue) has two large round trunnions (or arc-shaped rails for larger telescopes) secured on the left and right.

The replacement of trunnions by a bolt underneath, to connect the gun to the mounting, reduced the.

tube, jacket, 19 hoops and an elevating band with integral trunnions.

The Mod 1 had no trunnions and were not hooped to the muzzle.

rear-positioned trunnions.

The advantage of rear-positioned trunnions is that the breech doesn't "disappear" into a box trail as is the case with trunnions mounted.

bore was bored out to proper size, the exterior was turned smooth, the trunnions were turned on a trunnion lathe, and a vent was drilled.

Finally, trunnions were added and a bore was drilled out.

in strict geometric relationship to the kingpin, or the top and bottom trunnions, which connect the kingpin to the control arms, would be severely stressed.

trunnions.

Now, the barrel was suspended from a forged-steel inverted U-shaped cradle which had trunnions to attach it to the carriage.

The trunnions.

Their trunnions are marked, “W.

By contrast with naval practice, in which guns pivot in elevation on trunnions near their breeches, their muzzles and barrels protruding and moving in.

The Mark 3 Experimental was a 30 caliber gun that used trunnions and had 11 hoops with the outer hoop starting 4 in (100 mm) from the breech.

Single stack magazine wells and single stack trunnions were widened to accept standard AK double-stack magazines together with.

constructed of tube, jacket, 16 hoops, an elevating band and integral trunnions with a screwed on muzzle bell.

cabinet-mounted trunnions and some have table-mounted trunnions.

In general, cabinet-mounted trunnions are easier to adjust than table-mounted trunnions.

The trunnions had a diameter of 3.

67 in (93 mm) and the distance between the ends of the trunnions was 15.

Its trunnions were placed as far forward as possible to balance the barrel and minimize.

had old-style trunnions by which they were mounted on Vavasseur inclined slides to absorb recoil.

QF Mk I and II dispensed with trunnions and instead on.