undersize Meaning in Bengali
এ ধরনের স্বাভাবিক চেয়ে ছোট
Similer Words:
underskirtsundersky
underslung
undersoil
undersoils
undersold
undersong
underspend
underspending
underspends
underspent
understanded
understatements
understock
understocks
undersize's Usage Examples:
The same is then true for matching undersize parts with undersize counterparts.
bullets larger than design specifications causes excessive pressures, while undersize bullets cause low pressures, insufficient muzzle velocities and fouling.
Because he was undersize and swarthy, Hutton was given the nickname ‘Darkie’.
mass fraction of undersize in the overflow, Mu(f) is the mass fraction of undersize in the feed, Mu(u) is the mass fraction of undersize in the underflow.
18mm gauge was still undersize by almost a millimetre.
dimensions (such as the diameter of a hole) may be cut intentionally undersize, to allow for a predictable dimensional change following future cutting.
Eu shows the efficiency of undersize recovery.
U is mass rate of solids in the undersize stream.
material turn over on the screen surface, maximizing the quantity of undersize-material penetration.
the size of seeds at the expense of their number may be more effective undersize-asymmetric resource competition, since larger seeds tend to produce larger.
Muhurats are packed with oversize individuals in undersize clothes, their eyes and thighs gleaming with synthetic sheen.
feed is not important, if the material is sufficiently dewatered and the undersize fraction is efficiently removed.
Surgeons can decide to "undersize" the device, "truesize" the device, or "oversize" it.
The undersize material from the scrubber screen (less than 4 mm) is pumped onto a second.
Oversize product was returned to the kernelling mill, while undersize product was returned to the press mill.
claims by accusing the foundation of "keeping several dozen chimpanzees in undersize cages and causing the avoidable deaths of at least five chimpanzees".
These sizes are:[citation needed] Drill blanks have an undersize tolerance of +0/−0.
geometry and finish necessitate two operations: a drilling to slightly undersize, followed by reaming with a reamer.
undersize's Meaning':
smaller than normal for its kind
Synonyms:
undersized; small; little;
Antonyms:
large; big; unlimited; superior;