uprights's Usage Examples:

, between the uprights and over the crossbar.

the center of the handles, making a wide H shape (the cheeks form the uprights of the H, the stretcher the crossbar of the H).

This form of the joint is commonly used to house a rail in uprights, such as legs.

allowed to attempt to score one extra point by kicking the ball through the uprights in the manner of a field goal, or two points by bringing the ball into.

Torpedo cars did not have B pillars, so the only uprights present were those supporting the windshield.

The company offers a full line of vacuum cleaners, including uprights, cordless, canisters, sticks and handhelds.

structure usually consists of two vertical posts, called goal posts (or uprights) supporting a horizontal crossbar.

which follows the tradition of the Baekje and the use of headbands with uprights, most notably used in the crowns of Silla.

drilled holes, in contrast to standard chairs (whose back legs and back uprights are continuous).

support, in the later bay designs, a capstone could be supported on just two uprights (forming a single bay), the three stones being built as one unit, like.

used when the uprights are resting on uneven floors; the shims, equal in size to the base of the uprights, are installed beneath the uprights to level the.

Yale captain Walter Camp drop-kicked the ball through the uprights, but the goal was disallowed when the referee ruled the ball had touched.

Suspension (front) Aluminium uprights with carbon fibre composite wishbones, trackrod and pushrod.

chosen by each manufacturer Front and rear suspension: Aluminium alloy uprights, carbon-composite double wishbone with springs and anti-roll bar Wheel.

tonnes (28 tons) and is in contact with only three of the uprights.

A gap between the uprights on the eastern side probably indicates where an entrance.

The engawa is supported on posts, identical to the other uprights of the house.

A row of uprights runs long the inside of the engawa, and the shōji sliding.

This has two uprights, with a stock at their lower end to restrain the neck of the "victim".

The inner faces of the uprights contain tracks within.

Spindles are carried by steering knuckles or "uprights".

consists of 3 or 4 parts: uprights put together in pairs, round poles laid horizontally or diagonally between the two uprights, and binding cord usually.

He is best known for introducing small cottage and oblique uprights and an action considered to be the predecessor of the modern upright action.

Synonyms:

perpendicular; vertical; unsloped;

Antonyms:

scarce; controlled; horizontal; inclined;