Noun:

ভোল্টেজ বিভাজক,

voltage divider শব্দের বাংলা অর্থ এর উদাহরণ:

এর মূল্যায়ন s = j ω . {\displaystyle s=j\omega \,.} বর্তনীটিকে একটি ভোল্টেজ বিভাজক হিসাবে বিবেচনা করে আমরা দেখতে পাই যে আবেশকের দুইপাশের ভোল্টেজটি হলো: ।

যেহেতু রেফারেন্স ভোল্টেজটি নির্ভুলভাবে ক্যালিব্রেটেড ভোল্টেজ বিভাজক থেকে উৎপাদিত হতে পারে তাই কোনও পটেনশিওমিটার সম্ভাব্য পরিমাপের উচ্চ নির্ভুলতা ।

উচ্চ সাধারণ-মোড ভোল্টেজ এবং নিম্ন ভোল্টেজগুলির মধ্যে একটি প্রতিরোধমূলক ভোল্টেজ বিভাজক বা একটি বিচ্ছিন্নকরণ পরিবর্ধক অবশ্যই অন্তর্ভুক্ত থাকতে হবে ।

j ω C . {\displaystyle Z_{C}=-{\frac {j}{\omega C}}\,.} সার্কিটটিকে ভোল্টেজ বিভাজক হিসাবে দেখে ধারক বরাবর ভোল্টেজটি হ'ল: V C ( s ) = 1 C s R + 1 C s V ।

যার মাধ্যমে নিম্ন ভোল্ট দেয়া হয় ৫ CV কন্ট্রোল ভোল্টেজ যা মধ্যস্থিত ভোল্টেজ বিভাজক নিয়ন্ত্রণে সাহায্য করে ৬ THR থ্রেশোল্ড, যেখানে ব্যবধান শেষ হয় ৭ DIS ।

এরপর প্যানেলটি এক সময়ে এক অক্ষের ভোল্টেজ বিভাজক হিসাবে আচরণ করে ।

voltage divider's Usage Examples:

In electronics, a voltage divider (also known as a potential divider) is a passive linear circuit that produces an output voltage (Vout) that is a fraction.

The two parts of the base form a voltage divider, which sets the operating point of the UJT.

That voltage divider can be programmed with two physical.

The voltage divider configuration achieves the correct voltages by the use of resistors.

resistor with a sliding or rotating contact that forms an adjustable voltage divider.

formula describing a current divider is similar in form to that for the voltage divider.

is made to act like a variable resistor, continuously adjusting a voltage divider network to maintain a constant output voltage and continually dissipating.

In this arrangement, attenuation and summation are separated: a voltage divider acts as an attenuator and the loop acts as a simple series voltage.

the reference voltage can be produced from an accurately calibrated voltage divider, a potentiometer can provide high precision in measurement.

oscillator is that the feedback for the active device is taken from a voltage divider made of two capacitors in series across the inductor.

extremely accurate measurements (in contrast with something like a simple voltage divider).

The circuit behaves as a voltage divider, but with the voltage across the base-emitter resistor determined by.

Because the input resistance of the second stage forms a voltage divider with the output resistance of the first stage, the total gain is not.

Green: Between the positive supply voltage VCC and the ground GND is a voltage divider consisting of three identical resistors, which create two reference.

The Kelvin-Varley voltage divider, named after its inventors William Thomson, 1st Baron Kelvin and Cromwell Fleetwood Varley, is an electronic circuit.

With the use of an external voltage divider, a TL431 can regulate voltages ranging from 2.

R13) form a voltage divider to set an internal voltage to mimic the action of an external VCO input.

The source for this voltage divider is the five volt.

A variable resistor would dissipate power as heat and acts as a voltage divider.

being developed in Sweden by Dr Uno Lamm, lacked the external anode voltage divider networks which were found necessary to obtain reliable operation at.

voltages are obtained by connecting the adjustment pin to a resistive voltage divider between the output and ground.

a precision voltage divider circuit within the probe body.

Probes intended for up to 100 kV typically employ a resistor voltage divider, with an input.

Synonyms:

resistance; pot; resistor; potential divider; potentiometer;

Antonyms:

willingness; responsiveness;