compressibility's Usage Examples:

the compressibility (also known as the coefficient of compressibility or, if the temperature is held constant, the isothermal compressibility) is a.

In thermodynamics, the compressibility factor (Z), also known as the compression factor or the gas deviation factor, is a correction factor which describes.

This variation in particle separation and speed is referred to as compressibility.

The compressibility of water is a function of pressure and temperature.

At 0 °C, at the limit of zero pressure, the compressibility is 5.

for a simple 1-component system are: Compressibility (or its inverse, the bulk modulus) Isothermal compressibility β T = − 1 V ( ∂ V ∂ P ) T = − 1 V ∂.

the compressibility β = 1 ρ d ρ d p .

} If the compressibility is acceptably.

speed of compression waves in solids is determined by the medium's compressibility, shear modulus and density.

error; and equivalent airspeed is calibrated airspeed adjusted for compressibility effects.

effects of compressibility.

When the effects of compressibility on the solution.

When the compressibility is important the elastic forces must be considered along with inertial.

dimensionless thermodynamic coordinates, taken together with a substance's compressibility factor, provide the basis for the simplest form of the theorem of corresponding.

that is used on all modern supersonic aircraft, and conducted the key compressibility research that enabled the Bell X-1 to break the sound barrier.

The tank is partially filled with air, whose compressibility cushions shock caused by water hammer and absorbs excess water pressure.

behaviour of real gases, the following must be taken into account: compressibility effects; variable specific heat capacity; van der Waals forces; non-equilibrium.

is a measure of the compressibility characteristics of fluid flow: the fluid (air) behaves under the influence of compressibility in a similar manner.

of the bulk modulus at fixed temperature is called the isothermal compressibility.

solving the Navier-Stokes equations, including the method of artificial compressibility, the projection method, and vortex methods.

engineers come across working with pneumatic cylinders has to do with the compressibility of a gas.

Brake fluids must maintain a low level of compressibility, even with varying temperatures to accommodate different environmental.

Synonyms:

squeezability; sponginess; softness;

Antonyms:

fitness; good health; incompressibility; hardness;