impedance's Usage Examples:

electrical impedance is the measure of the opposition that a circuit presents to a current when a voltage is applied.

Quantitatively, the impedance of a two-terminal.

dimensions along their length, giving them a uniform impedance, called the characteristic impedance, to prevent reflections.

desired matching impedance might not correspond to the dynamic output impedance of the transmitter as analyzed as a source impedance but rather the design.

In electronics, impedance matching is the practice of designing the input impedance of an electrical load or the output impedance of its corresponding.

part of series impedance) will be half of the series impedance of the comparable dipole.

A quarter-wave monopole, then, has an impedance of 73 + i 43 2.

The characteristic impedance or surge impedance (usually written Z0) of a uniform transmission line is the ratio of the amplitudes of voltage and current.

cable characteristic impedance is important to minimize loss.

The source and load impedances are chosen to match the impedance of the cable to ensure.

in-line between a low impedance microphone and a high impedance input.

Low-impedance microphones are preferred over high impedance for two reasons: one.

in circuits are used to lower voltage, dissipate power, and to improve impedance matching.

Acoustic impedance and specific acoustic impedance are measures of the opposition that a system presents to the acoustic flow resulting from an acoustic.

the characteristics of an op-amp circuit, its gain, input and output impedance, bandwidth etc.

sharing a common signal return path, electrical impedance in the return path creates common impedance coupling between the signals, resulting in crosstalk.

The output impedance of an electrical network is the measure of the opposition to current flow (impedance), both static (resistance) and dynamic (reactance).

The input impedance of a unilateral amplifier is independent of load, and output impedance is independent of signal source impedance.

Dielectric spectroscopy (which falls in a subcategory of impedance spectroscopy) measures the dielectric properties of a medium as a function of frequency.

Impedance–pH monitoring is a technique used in the diagnosis of gastroesophageal reflux disease (GERD), by monitoring both impedance and pH.

It is defined as the reciprocal of impedance, analogous to how conductance ' resistance are defined.

Their impedance varied; headphones used in telegraph and telephone work had an impedance of 75 ohms.

waves given a specified reference impedance Z0.

The reference impedance used is typically the characteristic impedance of a transmission line that's involved.

Synonyms:

resistivity; electrical phenomenon; electric resistance; ohmage; ohmic resistance; electrical resistance; resistance;

Antonyms:

responsiveness; willingness;