বৈদ্যুতিক বর্তমান প্রবাহ একটি উপাদান বিরোধী; ohms তা পরিমাপ

impedances's Usage Examples:

Where it is needed to add or subtract impedances, the cartesian form is more convenient; but when quantities are multiplied.

impedances can eventually be reduced to a single impedance by successive applications of impedances in series or impedances in parallel.

For two impedances to be complex conjugates their resistances must be equal, and their reactances.

or more impedances are in parallel, the current that enters the combination will be split between them in inverse proportion to their impedances (according.

resistive impedances.

It means the theorem applies for AC in an exactly same way to DC except that resistances are generalized to impedances.

reactive impedances as well as resistances.

The Norton equivalent circuit is used to represent any network of linear sources and impedances at a given.

In general, the image impedances of ports 1 and 2 will not be equal unless the network is symmetrical (or.

conductors of the same type, each of which have equal impedances along their lengths and equal impedances to ground and to other circuits.

from one winding to another by magnetic induction, matches line and drop impedances, and prevents direct conduction between the line and the drop.

chart can be used to simultaneously display multiple parameters including impedances, admittances, reflection coefficients, S n n {\displaystyle S_{nn}\,}.

The two impedances form a voltage divider with a shunt element that is large relative to.

the need to achieve a better match of the filter into the terminating impedances.

The fraction of sound absorbed is governed by the acoustic impedances of both media and is a function of frequency and the incident angle.

analysis starts with a calculation of the input and output impedances (the image impedances) and the transfer function of a section in an infinite chain.

velocities at that depth due to the differences between the acoustic impedances of the solid mantle and the molten outer core.

An L pad is a network composed of two impedances that typically resemble the letter capital "L" when drawn on a schematic.

The dual of a network is the network whose impedances are the duals of the original impedances.

occurs in an electric circuit at a particular resonant frequency when the impedances or admittances of circuit elements cancel each other.

connecting two electrical impedances in series, as shown in Figure 1.

The input voltage is applied across the series impedances Z1 and Z2 and the output.

impedances's Meaning':

a material's opposition to the flow of electric current; measured in ohms

Synonyms:

resistance; electrical resistance; ohmic resistance; ohmage; electric resistance; electrical phenomenon; resistivity;

Antonyms:

willingness; responsiveness;