Noun:

টাই আলোকরশ্মি,

tie beam's Usage Examples:

of opposing rafters were thus initially tied together by a horizontal tie beam, to form coupled rafters.

tie beam) to the apex of a triangular truss.

The king post, itself in tension, connects the apex of the truss with its base, holding up the tie beam (also.

beams projecting from the wall on which the rafters land, essentially a tie beam which has the middle cut out.

A full cruck does not need a tie beam and may be called a "full cruck - open" or with a tie beam a "full cruck - closed".

separate tie beam which is below and parallel with the main roof tie beam, and set in the gin gang's side walls at either end.

The mill's tie beam has to.

traditional timber framing for a post in roof framing which stands on a tie beam or collar beam and supports a collar plate.

It has a tie beam roof covered with thatch.

separate tie beam, which is below and parallel with the main roof tie beam and set in the gin gang's side walls at either end.

A collar near the bottom of the rafters may replace a tie beam and be designed to keep the rafters from spreading, thus are in tension:.

tension between the rafters (top chords) and a tie beam (bottom chord), or 2) (U.

) A short of the tie beam only supporting the rafters via struts.

The earliest surviving roofs in Europe are of common rafters on a tie beam; this assembly is known as a "closed couple".

A tie beam could also be carried, either at each curb level, or just the bottom curb.

The canted posts support a secondary girt below the principal tie beam instead of the principal beam itself.

Synonyms:

sign; radio beam; signal; signaling;

Antonyms:

unfasten; disconnect; detach; absorb; dark;