workpiece's Usage Examples:

A lathe (/leɪð/) is a machine tool that rotates a workpiece about an axis of rotation to perform various operations such as cutting, sanding, knurling.

many woodworking tools, they are typically used to guide or secure a workpiece while it is being sawn, planed, routed or marked.

the workpiece.

The workpiece is mounted on centers and rotated by a device known as a lathe dog or center driver.

The abrasive wheel and the workpiece are.

the workpiece, while the latter does.

In open-die forging, a hammer strikes and deforms the workpiece, which.

A holdfast or hold fast is a tool used to hold a workpiece firmly to the top or side of a wooden workbench or on the top of an anvil.

more common process, the broach is run linearly against a surface of the workpiece to effect the cut.

drill or an end mill and the workpiece.

Coolant is generally introduced by a spray across the face of the tool and workpiece to decrease friction and temperature.

unfinished workpiece requiring machining will need to have some material cut away to create a finished product.

A finished product would be a workpiece that.

describes a helix toolpath by moving more or less linearly while the workpiece rotates.

cutting tool and the surface of the workpiece it is operating on.

It is expressed in units of distance across the workpiece surface per unit of time, typically.

The metal (known as the "workpiece") is transported to and from the forge using tongs, which are also used to hold the workpiece on the smithy's anvil while.

mineral, that is used to shape or finish a workpiece through rubbing which leads to part of the workpiece being worn away by friction.

creating perforations is called perforating, which involves puncturing the workpiece with a tool.

electrode (cathode), a conductive fluid (electrolyte), and a conductive workpiece (anode); however, in ECM there is no tool wear.

is a type of machine tool that uses linear relative motion between the workpiece and a single-point cutting tool to machine a linear toolpath.

low-carbon workpieces; workpieces are in contact with a high-carbon gas, liquid or solid; it produces a hard workpiece surface; workpiece cores largely.

Coining is a form of precision stamping in which a workpiece is subjected to a sufficiently high stress to induce plastic flow on the surface of the material.

A try square is so called because it is used to try how square the workpiece is.

or mitre saw is a saw used to make accurate crosscuts and miters in a workpiece by positioning a mounted blade onto a board.

center, is a tool that has been ground to a point to accurately position a workpiece on an axis.

Synonyms:

work; piece of work;

Antonyms:

inactivity; idle; studio;