workpieces's Usage Examples:

are used to hold workpieces square to the table during marking out operations.

Adjustable angle plates are also available for workpieces that need to be.

woodworking bench plane typically used for preparing and flattening rough workpieces before using other planes, such as the jointer plane and the smoothing.

which batches of workpieces are added, run, and removed before the next batch is run, or as continuous systems, in which the workpieces enter at one end.

characterized by the following key points: It is applied to low-carbon workpieces; workpieces are in contact with a high-carbon gas, liquid or solid; it produces.

This article refers to the clamp used to hold together two workpieces.

A scriber is a hand tool used in metal work to mark lines on workpieces, prior to machining.

used as an arc welding electrode or filler material for use with AA 2219 workpieces.

striking knife is a woodworking layout tool used for accurately marking workpieces.

to part, reducing the requirement for skilled labor by simplifying how workpieces are mounted, and increasing conformity across a production run.

Grinding is used to finish workpieces that must show high surface quality (e.

materials being welded together are known as the workpieces and must conduct electricity.

The width of the workpieces is limited by the throat length of the welding.

Typical workpieces include small to medium-sized castings, forgings, screw machine parts.

cryogenic temperatures to aid in the removal of flash on cast or molded workpieces.

various shapes of materials such as straight, conical, curved, or grooved workpieces.

Commonly plated workpieces include nails, screws, nuts, washers, stampings, springs, clips, and sintered.

number of relatively small workpieces.

In this batch-type operation, specially shaped pellets of media and the workpieces are placed into the tub of a.

very large workpieces would be too large to support on a router table and must be routed with a hand-held machine, very small workpieces would not support.

A vise is another example of a simple type of fixture used to fix workpieces.

be interchanged with the grinding wheels in order to clean or polish workpieces.

A cryogenic treatment is the process of treating workpieces to cryogenic temperatures (i.

Synonyms:

work; piece of work;

Antonyms:

inactivity; idle; studio;